|
|
Perform Printer Maintenance Message |
|
|
|
Perform Printer Maintenance Message |
|
|
To clear the Maintenance Service Message "Perform Printer Maintenance" if it appears in the display |
|
HP LaserJet IIISi: |
|
1. press Online so light goes off |
|
2. Hold down MENU until PCL CONFIG MENU appears |
|
3. press the MENU key until SERVICE MSG=ON appears |
|
4. press + or - key to change dispaly to SERVICE MSG=OFF |
|
5. press ENTER/RESET MENU key to turn message off, the * should appear then press ONLINE |
|
HP LaserJet 4Si |
|
1. press ONLINE so light goes off |
|
2. press MENU until CONFIG MENU appears |
|
3. press the ITEM key until SERVICE MSG=ON appears |
|
4. press + or - key to change dispaly to SERVICE MSG=OFF |
|
5. press ENTER key to turn message off, the * should appear then press ONLINE |
|
HP LaserJet 5Si: |
|
1. press MENU key 4 times for CONFIG MENU |
|
2. presss ITEM to display SERVICE MESSAGE=OFF |
|
3. press ENTER |
|
4. press ONLINE |
|
HP LaserJet 4000/4050/4100/5000 |
|
1. power off printer |
|
2. Hold down ITEM & VALUE keys, turn printer on and wait until RESET MAINTENANCE COUNT is displayed and release keys |
|
HP Color LaserJet 4500 |
|
1. power off printer |
|
2. hold down the CANCEL JOB & SELECT keys and turn on printer, wait until the display goes blank and the the three LED's come on |
|
3. press the right side of the MENU +/- , then press the SELECT key |
|
4. you are in the SERVICE MODE after the normal test complete |
|
5. press the item key until the FUSER MAINTENANCE COUNT appears |
|
6. press VALUE +/- to change to zero |
|
7. press SELECT to save |
|
8. press GO printer should return to ready |
|
HP LaserJet 8100/8150 |
|
1. Power off printer |
|
2.. To enter service mode press and hold down SELECT & JOB CANCEL, then power on printer when until the dispaly goes blank and the LED's light. |
|
3. press MENU then SELECT - SERVICE MODE will be displayed then it will repeat the normal power on tests and SERVICE MODE will again be dispalyed |
|
4. pres MENU to display SERVICE MENU |
|
5. press ITEM util MAINTCOUNT is displayed |
|
6.use +/- to zero out digits |
|
7. press GO to return printer to ready |
|
HP LaserJet 9000 |
|
1. Power off printer |
|
2. press and hold the check key |
|
3. power on printer |
|
4. release the key after all three lights come on should display SELECT LANGUAGE |
|
5. press the up arrow until MAINTENANCE KIT is dispalyed then press the check key again and the maintenance kit count has been reset |
